
India Is Finally Building the Helicopter Engines It Cannot Afford to Import Forever
7 Oct 2026
Created by
The BV Team
For decades, India has been learning to build aircraft. What makes them fly is the harder question.
The new generation Shakti helicopter-engine production line at the Hindustan Aeronautics Limited's (HAL) Koraput facility, therefore, deserves more attention than the investment figure of ₹218 crore implies. With full production by 2028-29, the facility will produce up to 100 Shakti engines every year, which will lead to additional capacity for the Dhruv and Prachand helicopters.
But for India it is not really a tale of another factory. It is the slow but steady closure of one of the most crucial divisions in the country's defence industrial base propulsion.
The complexity of aircraft engines is at the extreme end of manufacturing complexity. It requires metallurgy, single-crystal blades, high-temperature materials, precision machining, combustion technology and thousands of hours of testing to all work together. One of the things people often forget is that a country can make an aircraft at home, but still be strategically dependent if they have to import their engines from somewhere else.
India is no stranger to that issue.
The story of Koraput is told by the place. The HAL division has been engaged in the development of engines for the MiG-21, MiG-27, MiG-29 and Su-30MKI squadrons since 1964 and has refurbished over 9,000 engines. It is now down to delivering 2000th aero-engines. But many of India's skills were developed in the licensed production, maintenance and overhaul of engines, whose core intellectual property was elsewhere.
Shakti was an important change.
The engine was co-developed by HAL, and France's Safran, and modified to suit the “hot-and-high” operating conditions of Indian helicopters and is in the range of about 1,400-shaft-horsepower. It has enabled India to gain valuable experience not only in the assembly of engines but in the design of components, their manufacture and to support the engines during their operating life, for it was used to power Dhruv and Prachand variants.
More important than the strategic value is the economics.
A military engine produces expenditures for decades after it is loaded onto the helicopter off the production line. The value of spares, scheduled overhaul, repairs, replacement modules, upgrades and technical support are a significant amount larger than the value of the initial manufacturing contract. If India is able to control more of this chain domestically, then a higher ratio of defence expenditure is within the Indian industrial economy.
Next up is Aravalli.
This 3,500-4,000 shp engine is being developed by half joint venture SAFHAL (Safran Helicopter Industries and HAL) for the proposed 13-tonne Indian Multi-Role Helicopter (IMRH) variant of naval Deck Based Multi-Role Helicopter (DBMRH). This is a significantly more powerful power than Shakti and may be commercially viable once the IMRH programme is scaled up.
Previously the requirement for IMRH class helicopters in India was estimated at 400 as the armed forces gradually replace old medium lift helicopters. The need for hundred of initial engines, and engine reserve and decades of maintenance would arise not only for the initial engines but also for the modules, spares and overhaul capacity.
Here is where defence industrial policy becomes business policy.
In FY2025-26, India's defence exports have touched a record high of ₹38,424 crore, an increase of 62.66 per cent from the previous year. The defence public sector companies were dominant, with 54.84 per cent compared with 45.16 per cent for the private industry. For India to follow the trajectory of growth in exports of fully built aircraft, helicopters and sophisticated platforms, and not predominantly components and selected weapon systems, propulsion will not be the missing link in the jigsaw.
So the most important of the programmes may be the lesser known HTSE-1200.
Unlike the collaborative Shakti and Aravalli programmes, HAL's HTSE-1200 is being developed to build an engine for helicopters in the 3.5 to 6.5 tonne category which is to be designed by India. It would be too soon to say this was a success yet as the programme is still in its development stage. That distinction matters. There are three levels of capabilities: manufacturing, co-developing and mastering the technologies needed to design an engine.
The aim of the strategic objective is to progress through all 3.
Another warning exists in Indian aviation, too. Delays with the imported GE F404 engines have proven how an otherwise indigenous aircraft-production programme can be susceptible to a component of the entire production that is reliant on a foreign supply chain. Helicopter programmes should not be a repeat of that at a larger scale.
It is for this reason that investments in superalloys, single-crystal turbine blades, testing capabilities, precision manufacturing and domestics come into play as well as the engines themselves. What India requires is not just an Indian name on an otherwise foreign-origin power plant. It should be able to control technologies that will impact the ability to manufacture, repair, modify, and scale an engine during a crisis.
The business is not limited to military helicopters. If an aerospace nation is successful in developing reliable propulsion, then the whole supporting system pours over to MRO, materials, castings, forgings, electronics, testing, and finally civilian aviation. Each step of the extra layer that enters into India provides skilled jobs and also decreases foreign exchange leakage.
The Shakti expansion, which costs ₹218 crore, is thus just one component of a much bigger industrial equation. Along here, HAL is also raising the capacity of its annual production of AL-31FP for the Su-30MKI fleet from 30 to 50 engines through an additional investment of ₹ 335-crore at Koraput.
All of this implies that India's Defence manufacturing narrative is moving in that direction.
Decades of aircraft purchase, aircraft assembly, and more and more, aircraft design. The last obstacle is propulsion.
Shakti, the helicopter engine, developed by India, has proved that the country can successfully industrialise an engine of the helicopter. It is a partnership that Aravalli could aim for the medium-lift category. HTSE-1200 has to show something more challenging that India will be able to design and own the engine in the future.








